OPTIONAL ADD-ON
Alignment Dock
A dock you set up once in your putting area. Instead of lining the gate up with the alignment jig every time you practice, you line the dock up one time. From then on the gate drops into the same spot, squared to your line. If it gets bumped out of place, realigning is quick: drop it back into the dock.
Line it up once. Drop the gate in every time after.
Set it up once
You do this one time. After that there is nothing to line up.
- 1
Put it together
Your Alignment Dock ships in the box with your gate, in three pieces. Fit the two corner pieces onto the crossbar.
- 2
Line it up
Set the dock on your putting surface and line it up square to your putting line. You only do this once.
- 3
Pin it down
Fasten the dock with the 4 included twist pins, through the holes in its feet. Twist each one down until the dock sits firm.
- 4
Drop the gate in
That's it. From now on the gate drops into the dock already squared, so you can set up and start putting.
Good to know
- It is optional. The gate works exactly the same without it. Every gate still comes with the alignment jig, so you can always line up that way instead.
- Add an Alignment Dock when you order a gate. One per order, and it ships in the box with your gate. It is not sold on its own right now.
- It guides the gate; it does not lock it down. The gate lifts straight out, and a solid bump can still move it. Drop it back into the dock and it is squared again.
- For indoor carpet and putting mats. The twist pins need something to grip.
- The twist pins are sharp. Handle them with care, and pick a spot out of walkways.
- 30-day returns. Send the dock back with your gate within 30 days and we refund both. The 12-month warranty covers the gate, not the dock. Details are on the returns and warranty page.